Wave run-up
Definition of Wave run-up:
Wave run-up is the maximum onshore elevation reached by waves, relative to the shoreline position in the absence of waves.
This is the common definition for Wave run-up, other definitions can be discussed in the article
|
Notes
Wave run-up is an important parameter for assessing the safety of sea dikes or coastal settlements. Wave run-up is the sum of wave set-up and swash uprush (see Swash zone dynamics) and must be added to the water level reached as a result of tides and wind set-up.
By waves is meant: waves generated by wind (locally or on the ocean) or waves generated by incidental disturbances of the sea surface such as tsunamis, seiches or ship waves. Wave run-up is often indicated with the sympol [math] R [/math].
For waves collapsing on the beach, the wave run-up can be estimated to first approximation with the formula of Hunt (1959) [1],
[math]R = \eta_u + H \xi ,[/math]
where [math]\eta_u[/math] is the wave set-up, [math]H[/math] is the offshore wave height and [math]\xi[/math] is the wave similarity parameter,
[math]\xi = \Large\frac{\tan \beta}{\sqrt{H/L}}\normalsize = T \tan \beta \Large\sqrt{\frac{g}{4\pi H}}\normalsize , [/math]
where [math]L = g T^2/(2 \pi)[/math] is the offshore wave length, [math]\beta[/math] is the beach slope and [math]T[/math] is the wave period. The horizontal wave incursion is approximately given by [math] R / \tan \beta[/math].
Related articles
References
- ↑ Hunt, I.A. 1959. Design of seawalls and breakwaters. J. Waterw. Harbors Division ASCE 85: 123–152
