River tides

The general characteristics of tidal rivers are described in the article Tidal rivers. This article is concerned with the characteristics of tidal propagation.

Why river tides matter

The issue of tidal propagation is important for several reasons:

• The tide often yields a major contribution to high water levels and to the associated risk of flooding. This is especially the case when the mean water level is raised by an exceptional river discharge or by a storm surge at the estuarine mouth. The tide is therefore an important factor in the design and maintenance of flood defenses.
• The tide often plays a major role in processes of sedimentation and erosion. It therefore influences the navigable depth and the management strategies (e.g. dredging) to maintain the fairway.
• The tide enables the exchange of water, dissolved and particulate material and organisms between the river and adjacent wetlands. The tide therefore contributes to improving water quality and to ecological diversity of the fluvial ecosystem, by offering a unique habitat for many species.

If the downstream estuary is not closed off by a weir or a dam, the tidal wave penetrates much further inland than the seawater, see the article Tidal rivers. The penetration length depends primarily on the river discharge and the tidal amplitude at the river mouth (i.e. the head of the estuary). Frictional damping is the main process limiting tidal intrusion. Other factors limiting tidal intrusion are:

• the presence of a weir or a dam where the tidal wave is reflected,
• a runoff speed which is higher than the tidal wave propagation speed.

In practice, a tidal wave generally does not propagate upstream beyond the location where the river bed level exceeds the mean water level at the river mouth. This is not because the waves cannot run up the slope, but rather because friction is always strong in the upstream part of the tidal river .

River channel deepening

Many tidal rivers have seaports located far inland. Modern maritime traffic requires deep fairways, which are created by dredging of the natural tidal channels. Shoals are removed, channels are excavated and maintained at necessary depth by dredging and by structures such as training walls and groins.

These interventions have several consequences:

• Increase in tidal range, illustrated in Fig. 1 for several dredged tidal rivers in Europe. Deepening and smoothing the fairway, removing sills, beams and other turbulence-creating bedforms reduces frictional damping of the tidal wave. Frictional damping is further reduced as greater water depth promotes salinity and mud stratification of the water column (see e.g. Estuarine turbidity maximum).
• Increased risk of flooding when storm surge set-up coincides with springtide. The increase of tidal range mainly corresponds to a lowering of the LW tide level, as illustrated in Fig. 2 for the Elbe tidal river. The increase of the HW tide level is therefore modest in comparison to the downward shift of the LW level. Besides, channel deepening reduces the sensitivity of high water levels in the tidal river to high river runoff events.
• Increased seawater intrusion; the salinity limit is moved inland. The greater depth and greater tidal current velocities enhance estuarine circulation. The greater tidal excursion brings seawater further inland.
• Trapping of fine sediment further upstream in the tidal river. River runoff velocities are reduced while tidal currents are strengthened. Flood dominance associated with tidal asymmetry is enhanced (channel deepening increases the tidal asymmetry component M4 to about the same extent as the tidal range). Fluid mud layers can be formed during periods of neap tide and slack water. The positive feedback between tidal amplification and mud stratification can lead to hyperturbidity, as observed in the Ems tidal river.

Fig. 1. Increase in tidal range at inland seaports on tidal rivers in Europe over the past century. The increase in tidal range is the result of interventions aimed at creating deep and smooth channels for shipping traffic. Adapted from Winterwerp (2013).

Fig. 2. Evolution of the HW and LW tidal levels in the Elbe River at Hamburg in response to channel deepening in the past century. Adapted from ABP mer (2011).

Tide-induced water level set-up

Several characteristics of tidal wave propagation in tidal rivers are illustrated in Fig. 3 that refers to the St. Lawrence River in Canada. Remarkable features are:

• the huge distance along the river over which the tide has a significant influence on water levels,
• the inverse relationship between the tidal amplitude at the river mouth and the water level set-up upstream,
• the upstream distortion of the tide, with a fast tidal rise and a slow fall.

Fig. 3. Tide gauge data at the St. Lawrence estuary mouth (Ste Anne des Monts) and at an upstream location (Trois Rivières) along the St. Lawrence River (Canada) during the month September 1976. The fluvial discharge was fairly constant and close to the average of 12000 m3/s. The 0-meter datum is chosen arbitrarily for both stations. Adapted from LeBlond (1979).

The St. Lawrence river follows a seismically active rift valley that surfaced after the last glacial period. The great tidal intrusion length is primarily due to the small bed slope of only a few meters per 100 km in the downstream river reach and the substantial water depth that exceeds 10 m in many places.

The tide plays an important role in the upstream net water level set-up. During spring tide, much of the set-up is due to the nonlinear nature of frictional momentum dissipation (i.e. the second term in the right-hand side of Eq. (A1), which is not a linear function of the discharge). The nonlinear frictional momentum dissipation transfers tidal momentum to a residual pressure gradient that creates a water level slope. Transfer of tidal momentum to a residual pressure gradient also occurs due to the nonlinear nature of momentum advection in the tidal momentum balance (second term in the left-hand side of Eq. (A1)). These two nonlinear flow processes are responsible for the smaller net water level set-up at the gauge station Trois-Rivières during neap tide compared to the larger set-up during spring tide. A more detailed explanation is given in appendix A. Part of the water level set-up is further related to the water level slope needed to transmit the river runoff trough the tidal river.

Tidal asymmetry

Fig. 4. Simultaneously recorded tide curves at different stations (km distance from Quebec town) along the St. Lawrence River. Adapted from LeBlond (1978).

The tidal records displayed in Figs. 3 and 4 show that the sinusoidal character of the tide is progressively lost when moving upstream along the tidal river. Tidal rise is faster and tidal fall is slower. This means that the flood component of the total discharge is a strong short pulse in comparison to the ebb component. The development of this type of tidal asymmetry is a common feature of tidal propagation in tidal rivers. It is related to the faster propagation of the high water (HW) crest of the tidal wave compared to the slower propagation of the low water (LW) trough of the tidal wave. An explanation is given in appendix C. A similar process also occurs in estuaries, see for example Tidal asymmetry and tidal basin morphodynamics.

Tidal asymmetry is an important phenomenon for sediment transport in tidal rivers, especially in the downstream part of the tidal river during spring tides, when the maximum flood discharge exceeds the river discharge. The strong current associated with the short flood pulse can mobilize and carry more sediment than the weaker ebb current, even in the presence of residual downstream runoff. In many cases this results in a sediment convergence zone downstream of the site where the sediment transport capacity of the flood current is overturned by the transport capacity of the combined ebb current and river discharge. This sediment convergence zone corresponds to the so-called estuarine turbidity maximum and is generally located around the transition between estuary and tidal river. In periods of low river discharge and spring tide, fine sediment particles can be transported upstream over a long distance by tidal asymmetry. For example, fine sediments of marine origin have been found in the docks of Rouen, 80 km upstream from the seawater intrusion limit. Deposits of fine marine sediments have also been found in the fresh water reach of the tidal Scheldt river.

Appendix A: Influence of friction on tidal propagation

We consider tidal rivers that are not bounded by a weir or a dam. The tide can propagate upstream till it has faded by frictional damping. Important characteristics of the tidal influence on the water level variation in tidal rivers can be derived from the equations describing the tidal wave propagation. These equations express the momentum balance

[math]acceleration + inertia = pressure \; gradient - friction[/math]

and the volume (or mass) balance

[math]volume \; change = water \; transport \; gradient [/math] .

The corresponding formulas are

[math]\Large\frac{\partial Q}{\partial t}\normalsize + u \, \Large\frac{\partial Q}{\partial x}\normalsize = -gA \, \Large\frac{\partial \zeta}{\partial x}\normalsize - \Large\frac{c_D}{HA}\normalsize Q |Q| \qquad (A1) \quad[/math] and [math]\quad b \, \Large\frac{\partial \zeta}{\partial x}\normalsize = - \Large\frac{\partial Q}{\partial x}\normalsize . \qquad (A2)[/math]

Fig. A1. Schematic representation of a tidal river and symbol definitions.

Meaning of the symbols (see Fig. A1):

[math]Q(x,t)[/math] is the water discharge at time [math]t[/math] through a river cross-section with area [math]A(x,t)=b(x)H(x,t)[/math] at distance [math]x[/math] from the seaward boundary, [math]b(x)[/math] is the average cross-section width and [math]H(x,t)=h(x)+\zeta(x,t)[/math] is the water depth, [math]\zeta(x,t)[/math] is the water level with respect to a horizontal datum, [math]u(x,t)=Q/A[/math] is the average current velocity in the cross-section, [math]c_D[/math] is the friction coefficient (typically of order 0.003) and [math]g[/math] is the gravitational acceleration. The equations (A1) et (A2) are simplified expressions; major assumptions are: the cross-sectional variation of the velocity [math]u[/math] can be ignored, and the shape of the cross-section [math]A[/math] can be approximated by a rectangle.

In tidal rivers, the terms in the right-hand side of Eq. (A1) are usually much larger than the terms in the left-hand side. The momentum balance can then be approximated by

[math] gA \, \Large\frac{\partial \zeta}{\partial x}\normalsize =- \Large\frac{c_D}{HA}\normalsize Q |Q| . \qquad (A3)[/math]

We consider a horizontal tide [math]Q(x,t)[/math] with a single component of radial frequency [math]\omega[/math],

[math]Q(x,t) = -Q_0 (x) + Q_1 (x) \cos \theta, \quad \zeta (x,t) = \zeta_0 (x) + \zeta_1 (x) \cos (\theta + \psi(x)) \, + h.h. \, , \quad \theta = \omega t + \phi(x) , \qquad (A4)[/math]

where [math]h.h.[/math] stands for terms of higher harmonic order. There is no weir or dam where the tidal wave is reflected. Sufficiently far upstream (large positive [math]x[/math]), the fluvial discharge [math]Q_0[/math] is larger than the maximum tidal discharge [math]Q_1[/math]. In this case the friction term is given by

[math] - \Large\frac{c_D}{HA}\normalsize Q |Q| = \Large\frac{c_D}{HA}\normalsize Q^2 = \Large\frac{c_D}{HA}\normalsize \Big( Q_0^2 + \frac{1}{2} Q_1^2 - 2 Q_0 Q_1 \cos \theta + \frac{1}{2} Q_1^2 \cos 2 \theta \Big) = gA \, \Large\frac{\partial \zeta}{\partial x}\normalsize . \qquad (A5)[/math]

Fig. A2. Contribution of friction to non-tidal ([math]f_0[/math]) and tidal ([math]f_1, f_2, f_3[/math]) components of the water level gradient in a tidal river.

In the case of strong friction, due to the [math]\frac{1}{2} Q_1^2 [/math]-term, a steep water level slope [math]\Large\frac{\partial \zeta_0}{\partial x}\normalsize [/math] is required to enable the net runoff [math]Q_0[/math]. This implies that the mean height of the upstream water level [math]\zeta_0(x)[/math] is positively correlated with the tidal amplitude at the river mouth.

The term [math]-2 Q_0 Q_1 \cos \theta[/math] produces a negative gradient [math]\Large\frac{\partial \zeta_1}{\partial x}\normalsize [/math] and therefore dampens the tidal component of the upstream water level. Equation (A5) also shows that the friction generates a higher harmonic tidal component through the term [math]\frac{1}{2} Q_1^2 \cos(2 \theta)[/math].

A similar tidal influence on riverine water levels occurs when [math]Q_1 \gt Q_0[/math]. The mathematical development of the friction term is more complicated in this case, see Appendix B. The contributions of the friction term to the mean upstream water level (through the mean water level slope [math]\Large\frac{\partial \zeta_0}{\partial x}\normalsize [/math]), to the principal tidal component [math]\zeta_1[/math] and to higher tidal components are shown in Fig. A1 as a function of the relative strength of the fluvial discharge, [math]Q_0/Q_1[/math]. The friction and pressure terms are developed in harmonic components of successive order, and Eq. (A3) is rewritten as

[math]Q |Q| = Q_1^2 \big( f_0 + f_1 \cos \theta + f_2 \cos 2 \theta + f_3 \cos 3 \theta \big) = - \Large\frac{gHA^2}{c_D}\normalsize \, \Large\frac{\partial \zeta}{\partial x}\normalsize = - \Large\frac{gHA^2}{c_D}\normalsize \, \Big(\Large\frac{\partial \zeta_0}{\partial x}\normalsize + \Large\frac{\partial}{\partial x}\normalsize (\zeta_1 \cos( \theta +\psi)) + h.h. \, \Big). \qquad (A6)[/math]

Fig. A3. Contribution of friction to the mean water level gradient in a tidal river.

For a given value of the maximum tidal discharge [math]Q_1[/math], the term [math]f_1[/math] represents the influence of the fluvial discharge [math]Q_0[/math] on the damping of the upstream tidal amplitude [math]\zeta_1[/math]. Figure A3 shows that for values of [math]Q_0 \gt \frac{1}{2} Q_1[/math], the damping increases linearly with [math]Q_0[/math]. In contrast, no strong higher harmonic tides [math]\zeta_2[/math] and [math]\zeta_3[/math] are generated by the fluvial discharge.

For a given fluvial discharge [math]Q_0[/math], the mean water level slope [math]\Large\frac{\partial \zeta_0}{\partial x}\normalsize [/math] is proportional to [math]-f_0 Q_1^2/Q_0^2[/math]. This proportionality is shown in Fig. A2 as a function of [math]Q_0/Q_1[/math]. This figure shows that the upstream water level increase is strongly enhanced when the tidal discharge [math]Q_1[/math] increases compared to the fluvial discharge [math]Q_0[/math].

In conclusion, whilst the tidal amplitude is strongly damped in the case of large fluvial discharge, this decrease of the tidal amplitude goes along with a substantial increase of the mean water level in the upstream tidal river.

The expressions (A5) and (A6) show that the water level slope [math] \left\vert \Large{ \partial \zeta \over \partial x }\normalsize \right\vert [/math] is smaller during maximum flood flow [math]\theta=0[/math] than during maximum ebb flow [math]\theta=\pi[/math] . Assuming that the propagation speed of the tidal wave is the same at maximum flood flow and maximum ebb flow, then an observer at a fixed location will see a relatively slower water level rise at maximum flood flow and a relatively faster water level fall at maximum ebb flow. Water level records display the opposite behavior, as illustrated in Fig. 2: a faster water level rise (steep dipping wave front [math]\Large\frac{\partial \zeta}{\partial x}\normalsize \lt 0[/math]) and a slower water level fall (gently rising level behind the wave front [math]\Large\frac{\partial \zeta}{\partial x}\normalsize \gt 0[/math]). This behavior is due to the faster propagation (diffusion) speed of the high water (HW) wave crest relative to the low water (LW) wave trough. Two responsible effects are:

1. The frictional retardation of the propagation speed is smaller at HW than at LW because the water depth [math]h[/math] is higher and the cross-sectional area [math]A[/math] greater at HW relative to LW;
2. The HW propagation speed is enhanced by advection with the positive flood flow, while the LW propagation speed is retarded due to the opposing ebb flow.

These features are not included in the simplified equations (A2) and (A3). An explanation of the higher propagation speed of the HW tidal wave crest relative to the LW trough is given in appendix C and in the article Tidal asymmetry and tidal basin morphodynamics.

Appendix B: Development of the friction term

The development of the friction term for [math]Q_1 \gt Q_0[/math] was given by Dronkers (1964). In the case of a single harmonic tide [math]Q = -Q_0 + Q_1 \cos \theta[/math], the friction term is written as

[math]Q|Q| = Q_1^2 (\cos \alpha + \cos \theta) |\cos \alpha + \cos \theta|, \quad \cos \alpha = - Q_0/Q_1 \equiv -y. \qquad (B1)[/math]

The right-hand side can be developed into a sum of Chebyshev polynomials. A high degree of accuracy is achieved with only 4 terms. The final result is

[math] \Large\frac{ Q |Q| }{Q_1^2}\normalsize = f_0 + f_1 \cos \theta + f_2 \cos 2 \theta + f_3 \cos 3 \theta , \qquad (B2) [/math]

[math]f_0=d_0+ \frac{1}{2}d_2 - (d_1+ \frac{3}{2}d_3)y + d_2 y^2-d_3y^3, \; f_1=d_1 + \frac{3}{4}d_3 -2d_2y+3d_3y^2, \; f_2=\frac{1}{2}d_2-\frac{3}{2} d_3 y, \; f_3=\frac{1}{4}d_3. \qquad (B3)[/math]

The coefficients [math]d_0, d_1, d_2, d_3[/math] are given by

[math]d_0 = -\frac{7}{120} \sin 2 \alpha + \frac{1}{24} \sin 6 \alpha - \frac{1}{60} \sin 8 \alpha[/math]

[math]d_1 = \frac{7}{6} \sin \alpha - \frac{7}{30} \sin 3 \alpha - \frac{7}{30} \sin 5 \alpha + \frac{1}{10} \sin 7 \alpha[/math]

[math]d_2 = \pi - 2 \alpha + \frac{1}{3} \sin 2 \alpha + \frac{19}{30} \sin 4 \alpha - \frac{1}{5} \sin 6 \alpha[/math]

[math]d_3 = \frac{4}{3} \sin \alpha -\frac{2}{3} \sin 3 \alpha + \frac{2}{15} \sin 5 \alpha [/math]

Appendix C: Tidal asymmetry

Friction-dominance and [math]Q_0 \gt Q_1[/math] are assumed. According to (A1, A5) the tidal equations can be written as:

[math]b\Large\frac{\partial \zeta}{\partial t}\normalsize + \Large\frac{\partial Q}{\partial x}\normalsize = 0 , \quad Q^2 = \Large\frac{g \, b^2 (h+\zeta)^3}{c_D} \frac{\partial \zeta}{\partial x}\normalsize \normalsize . \qquad (C1)[/math]

Derivation of the second equation and substitution in the first equation gives

[math]\zeta_t = - \Large\frac{1}{b}\frac{\partial Q}{\partial x}\normalsize = D \, \Biggl(\Large\frac{\partial^2 \zeta}{\partial x^2}\normalsize + \Large\frac{3}{h+\zeta}\normalsize \Bigl(\Large\frac{dh}{dx}\normalsize +\Large\frac{\partial \zeta}{\partial x}\normalsize \Bigr) \Large\frac{\partial \zeta}{\partial x}\normalsize \Biggr) , \quad D = \Large\frac{g \, b \, (h+\zeta)^3}{2c_D \left \vert Q \right \vert}\normalsize. \qquad (C2)[/math]

Far upstream the variation of the water depth along the tidal river is small, [math]\Large\frac{\partial \zeta}{\partial x}\normalsize \sim - \Large\frac{dh}{dx}\normalsize [/math], if [math]Q_0[/math] is close to the mean river discharge. In this case the upstream propagation of HW and LW into the tidal river is approximately described by a diffusion equation,

[math]\zeta_t = D \, \Large\frac{\partial^2 \zeta}{\partial x^2}\normalsize . \qquad (C3)[/math]

[The case where [math]Q_0[/math] is very different from the mean discharge is discussed in Kästner et al. (2019)].

Substitution of a propagating damped tidal wave [math]\quad \zeta(x,t) = \zeta_0 (x) + a \large e^{- \mu x} \normalsize \cos(\omega t - kx) \;[/math] in Eq. (C3) gives [math]k=\mu=\sqrt{\Large\frac{\omega}{2D}}\normalsize .[/math]

The propagation speed is given by [math]\quad c = \Large\frac{\omega}{k}\normalsize = \sqrt{2\, D\, \omega}. [/math]

The diffusion speeds [math]c^+[/math] for HW and [math]c^-[/math] for LW are given by

[math]c^{\pm} = (h+\zeta_0 \pm \zeta_1)^{3/2} \, \Large \sqrt{ \frac{g \, b\, \omega}{4 c_D \left \vert Q^{\pm} \right \vert }}\normalsize , \qquad (C5)[/math]

where [math]\zeta_1 = a \large e^{- \mu x} [/math] is the amplitude of the main tidal component and [math]Q^{\pm}[/math] the total discharge (runoff + tide) at HW and LW, respectively. Equation (C4) shows that the HW tidal wave crest propagates faster than the LW tidal wave trough. The difference between [math]c^+[/math] and [math]c^-[/math] is further enhanced by advection with the positive tidal flow during HW and opposing tidal flow during LW (second term in the left-hand side of Eq. (A1)). Consequently, a tide gauge will record faster tidal rise than tidal fall.

Related articles

Tidal rivers

Estuarine turbidity maximum

Morphology of estuaries

Tidal asymmetry and tidal basin morphodynamics

References

The main author of this article is Job Dronkers Please note that others may also have edited the contents of this article. Citation: Job Dronkers (2023): River tides. Available from http://www.coastalwiki.org/wiki/River_tides [accessed on 24-11-2024] For other articles by this author see Category:Articles by Job Dronkers For an overview of contributions by this author see Special:Contributions/Dronkers J