Wave run-up

Definition of Wave run-up: Landward incursion of a wave. Wave run-up is usually expressed as the maximum onshore elevation reached by a wave, relative to the wave-averaged shoreline position. This is the common definition for Wave run-up, other definitions can be discussed in the article

Wave run-up is an important parameter for assessing the safety of sea dikes or coastal settlements. Wave run-up is the sum of wave set-up and swash uprush (see Swash zone dynamics) and must be added to the water level reached as a result of tides and storm setup.

By waves is meant: waves generated by wind (locally or on the ocean) or waves generated by incidental disturbances of the sea surface such as tsunamis, seiches or ship waves. Wave run-up is often indicated with the sympol [math] R [/math].

For waves collapsing on the beach, the wave run-up can be estimated in first approach with the formula of Hunt (1959) ,

[math]R = H \xi ,[/math]

where [math]H[/math] is the offshore wave height and [math]\xi[/math] is the wave similarity parameter,

[math]\xi = \Large\frac{S}{\sqrt{H/L}}\normalsize = S \, T \Large\sqrt{\frac{g}{4\pi H}}\normalsize , [/math]

where [math]L = g T^2/(2 \pi)[/math] is the offshore wave length, [math]S[/math] is the beach slope and [math]T[/math] is the wave period. The horizontal wave incursion is approximately given by [math] R / S[/math].

For more precise estimates of wave run-up see:

Swash

Swash zone dynamics

Tsunami