Argus applications
Successful use of video monitoring techniques in support of coastal management and engineering involves the quantification of relevant coastal state information from video data. Sophisticated, operational video analysis methods nowadays enable:
- the quantification of shoreline evolution and beach width, to evaluate the potential for recreation or to assess the morphological impact of a storm event (Application 1)
- the quantification of erosional and accretional sediment volumes at the intertidal beach, for example to evaluate the morphological impact of coastal structures, to investigate seasonal fluctuations in beach dynamics and beach nourishments or to study the behaviour of morphological features such as sand spits and tidal flats near a harbour entrance (Application 2)
- the quantification of subtidal beach bathymetry, to evaluate coastal safety, to assess the behaviour and performance of shoreface nourishments or even to facilitate military operations (Application 3)
- the quantification of wave run-up, to evaluate the stability of coastal structures such as seawalls, harbour moles and revetments (Application 4)
- quantification of Coastal State Indicators with a high resolution in time through assimilation of model computations with Argus observations (Application 5)
In a research context, video monitoring techniques have been applied to quantify alongshore flow velocities, wave characteristics such as wave angle and period, the occurrence of algae bloom and the distribution and persistency of rip currents. Future applications may involve the monitoring of visitor density at the beach and the prediction of rip currents.
The continuous collection of long-term, high-resolution data sets carries the additional advantage of a posteriori data selection, for instance for the consistent assessment of storm damage to public and private property and the early recognition of important erosion trends.
Contents
- 1 Application 1: quantification of storm-driven shoreline changes
- 2 Application 2: intertidal morphological changes at a nourished beach
- 3 Application 3: measurement of surf zone bathymetry
- 4 Application 4: quantification of wave run-up on coastal structures
- 5 Application 5: Beach Wizard, assimilation of model computations and video observations
Application 1: quantification of storm-driven shoreline changes
At Barcelona (Spain), a shoreline detection model was used to assess storm-driven shoreline changes in front of Puerto Olimpico. The model derives the location of the shoreline from time exposure images on the basis of the colour contrast between the dry and wet beach (Aarninkhof et al, 2003, Argus literature). Detailed observations show a shoreline retreat up to tens of meters during a single storm event.
Application 2: intertidal morphological changes at a nourished beach
At Egmond (The Netherlands), intertidal beach bathymetries were determined on a monthly basis by mapping a series of video-derived shorelines at different water levels throughout a tidal cycle. The mean vertical offset of this model is less than 15 cm along 85% of the 2 km wide study region. The resulting bathymetries (a) were used to quantify patterns of erosion and accretion after a combined beach and shoreface nourishment. Example results are presented in the graphs (b and c), which show means of the monthly volume changes per meter coastline (bars), as well as the cumulative morphological changes (lines). Negative values denote erosion. Figure (b) presents the volume changes at a location 400 m to the south of the Argus station; Figure (c) presents volume changes at a location 400 m to the north of the station. The analysis shows a tendency towards erosion during the first year. High-resolution video monitoring indicated that the additional beach nourishment implemented in the left-hand section (b) in July 2000 disappears from the intertidal beach within a few months.
Application 3: measurement of surf zone bathymetry
At Egmond (The Netherlands), Argus video imagery has been used to monitor the evolution of surf zone bathymetry after implementation of a shoreface nourishment in July 1999. The bed elevation is continuously updated on the basis of a comparison of video-derived and model-computed patterns of wave dissipation (Aarninkhof, 2003, Argus literature). This approach yields marginal deviations in the order of 10 to 20 cm at the seaward face of the bars, which increase up to 20 to 40 cm near the bar crest. The results show a shoreward migration of the outer bar after deployment of the shoreface nourishment in combination with a net accretion of sediment along the shallow part of the beach profile above the -2 m depth contour, thus confirming the beneficial impact of the nourishment.
Application 4: quantification of wave run-up on coastal structures
Wave run-up and wave overtopping are two of the mechanisms that may cause damage or even failure of coastal structures such as seawalls, harbour moles and groins. High frequency video observations (typically at 2 Hz) can be used to determine the statistics of wave run-up at beaches and coastal structures. The figure above shows an example of a timestack image, where pixel intensities are sampled along a cross-shore array in the swash zone and stacked over time. The position of the swash edge can be visually identified by the sharp change in intensity between the darker beach surface and the lighter ‘foamy’ edge of the swash bore (Holland and Holman, 1993, Argus literature). This type of monitoring yields information on the wave attack at structures during a single storm event or throughout the year.
Application 5: Beach Wizard, assimilation of model computations and video observations
The Beach Wizard model involves sophisticated use of high-resolution video observations in combination with a 2DH morphological model, which opens the door towards the nowcasting of nearshore hydrodynamics and bathymetric evolution with a high resolution in time and space. The Beach Wizard approach involves the application of a morphological area model to compute nearshore wave propagation and flow circulation patterns. Key-element of the model is the updating of bathymetry on the basis of high-resolution Argus video observations of the surf zone. This is achieved through assimilation of video-observed and model-predicted patterns of wave dissipation, wave celerity and intertidal beach bathymetry. Confidence intervals are determined for each bathymetry estimate, to enable a weighed assimilation of the different data sources and the model. Given the high resolution of video observations in time, this approach allows for virtually continuous monitoring of the evolution of surf zone bathymetry.
The technique has been applied to a synthetic case and two field sites at Duck, NC (USA) and Egmond (The Netherlands). The model is validated for a synthetic case which shows that the assimilation scheme is capable of recovering a barred beach bathymetry starting from an initially plane beach and only “knowing” the dissipation rate and celerity fields. The application to the Duck case shows that over a short time span (including one major storm) the model is capable of predicting the bathymetry rather accurately given a sequence of remotely observed inputs. The model was then applied to the longer term case of Egmond. Here, the model is also capable of predicting the profile change with the same parameter settings as in the Duck case. The agreement is better for the winter months with stronger observed signals than in the summer months.
The model output was used to estimate Coastal State Indicators. The intra-annual behavior shows a large variability which is on the order of the long-term (decadal) variation that is captured by the annual ground-truth surveys. While the net sum gain or loss over an alongshore area is smaller than the variation over an individual cross-section, the fact that beaches are very active over short time scales may have consequences for coastal management.
Back to ARGUS video monitoring system
Please note that others may also have edited the contents of this article.
|
[[Category:Articles by {{{AuthorFullName}}}]]
